9230 Simplify Adapter & Charger Automatic Test System
Programmable DC Electronic Load (EXTECH 5130)
Capacity 60V/60A/300W    
  Range Resolution Accuracy
CC Mode 0-6A / 0-60A 1.5mA / 15mA 0-6A: ±(0.1% of Setting + 0.1% F.S)
0-60A: ±(0.1% of Setting + 0.1% F.S) under 100W
CR Mode 1-4KΩ/ 1-25mΩ 0.25m (1/Ω) / 0.25mΩ ±(0.2% of Setting + 0.2% F.S.)
CV Mode 1-60V 15mV ±(0.05% of Setting + 0.1% F.S.)
Dynamic Mode Thigh / TLow 0.025mS-10mS / 1mS-20S
Operation Slew Rate 1mA-250mA/μS, 0.01A-2.5A/μS
Protection OCP, OPP, OVP, OTP, REV
Programmable AC Power Source (EXTECH 6610)
Power Rating 1000VA
Output Voltage, AC 0-300V Auto Range
Max AC output Current(RMS) 4.6A High Voltage Range / 9.2A Low Voltage Range
Max AC output Current(PEAK) 13.8A High Voltage Range / 27.6A Low Voltage Range
Output Frequency Range: 45-500HZ, Resolution: 0.1HZ, Accuracy: 0.03% of setting
Harmonic Distortion THD<0.5% at 45-500Hz (Resistive Load)
Load Regulation ≒0.5% at Resistive Load
Start / End Phase Angle 0-360° Resolution: 1, Accuracy: 1 (45-65HZ)
Oscilloscope (GOODWILL 2062)
Bandwidth limit 20MHz (-3dB)
Sensitivity 2mV/div ~ 5V/div (1-2-5 increments)
Accuracy ±(3% x |Readout|+0.05 div x Volts/div+0.8mV)
Input Coupling AC, DC & Ground
Input Impedance 1MΩ±2%, ~16pF
System Controller
Controller IPC P4 -2.0GHZ or Faster
Operational Environment Windows XP with Excel XP
Interational Board RS232